2007 Lexus IS 350FACTORY OEM SERVICE PROCEDURE

Problem Symptoms Table

POWER WINDOW CONTROL SYSTEM 

PROBLEM SYMPTOMS TABLE

Symptom Suspected area Reference
Power window does not operate with multiplex network master switch operation ECU-B, ECU-IG, PWR fuse -
Multiplex network master switch circuit (power source) Power Window Master Switch Power Source Circuit 
Power window regulator motor circuit Driver Side Power Window Motor Circuit 
Multiplex network master switch -
Front passenger side power window does not operate with multiplex network switch operation PWR fuse -
Multiplex network switch circuit (power source) Front Passenger Side Power Window Switch Power Source Circuit 
Power window regulator motor circuit (front passenger side) Front Passenger Side Power Window Motor Circuit 
Multiplex network switch (front passenger side) -
Rear LH side power window does not operate with multiplex network switch operation PWR fuse -
Multiplex network switch circuit (power source) Rear Power Window Switch LH Circuit 
Power window regulator motor circuit (rear LH side) Rear Power Window Motor LH Circuit 
Multiplex network switch (rear LH side) -
Rear RH side power window does not operate with multiplex network switch operation PWR fuse -
Multiplex network switch circuit (power source) Rear Power Window Switch RH Circuit 
Power window regulator motor circuit (rear RH side) Rear Power Window Motor RH Circuit 
Multiplex network switch (rear RH side) -
AUTO UP/DOWN function does not operate on driver side Diagnosis check DIAGNOSIS SYSTEM 
Power window regulator motor reset INITIALIZATION 
Multiplex network master switch -
Wire harness -
AUTO UP/DOWN function does not operate on any door side except driver side Diagnosis check DIAGNOSIS SYSTEM 
Power window regulator motor reset INITIALIZATION 
Multiplex network master switch -
Wire harness -
Remote UP/DOWN function does not operate DATA LIST/ACTIVE TEST DATA LIST/ACTIVE TEST 
Multiplex network master switch -
Multiplex network body ECU -
Wire harness -
Power window can be operated after engine switch is turned off even if operated conditions are not met Front door courtesy switch DOOR COURTESY SWITCH CIRCUIT
Wire harness -
AUTO UP operation does not fully close power window (Jam protection function is activated) Power window regulator motor reset CUSTOMIZE PARAMETERS 
Check & clean glass run -
Multiplex network master switch -
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.