2007 Lexus IS 250 RWD, AutomaticFACTORY OEM SERVICE PROCEDURE

Propeller Shaft: SST

SPECIAL SERVICE TOOLS DESCRIPTION (PROPELLER SHAFT)

G04043179Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09316-60011 Transmission & Transfer Bearing Replacer -
G04043180Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09316-00011) Replacer Pipe -
G04043181Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09325-40010 Transmission Oil Plug -
G04043182Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09330-00021 Companion Flange Holding Tool -
G04043183Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09330-50010 Worm Bearing Adjusting Screw Wrench -
G04043184Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09370-50010 Drive Line Angle Gauge -
G04043185Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09506-35010 Differential Drive Pinion Rear Bearing Replacer -
G04043186Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09922-10010 Variable Open Wrench -
G04043187Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09950-00020 Bearing Remover -
G04043188Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09950-00030 Bearing Remover Attachment -
G04043189Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09950-40011 Puller B Set -
G04043190Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09951-04020) Hanger 200 -
G04043191Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09952-04010) Slide Arm -
G04043192Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09953-04030) Center Bolt 200 -
G04043193Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09955-04021) Claw No.2 -
G04043194Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09958-04011) Holder -
G04043195Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
09950-50013 Puller C Set -
G04043196Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
(09952-05010) Slide Arm -
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.