2007 Lexus GX 470FACTORY OEM SERVICE PROCEDURE

Shift Lever Assembly: Installation

  1. INSTALL FLOOR SHIFT ASSEMBLY 
    Fig 1: Identifying Transmission Floor Shift Assembly Bolts
    G05261346Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Install the transmission floor shift assembly with the 4 bolts.

      Torque: 12 N*m (122 kgf*cm, 9.0 ft.*lbf) 

    2. Connect the connector on the transmission floor shift assembly.
  2. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY 
    Fig 2: Connecting Transmission Control Cable Assembly With Clip
    G05261363Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Connect the transmission control cable assembly with the clip, from the floor shift lever assembly.

      Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf) 

    NOTE:
    • Protrusion facing upward.
    • When the nut is remove, be sure to tighten the nut.
  3. INSTALL UPPER CONSOLE PANEL ASSEMBLY 
  4. INSTALL NO. 2 CONSOLE UPPER PANEL GARNISH 
  5. INSTALL NO. 1 CONSOLE UPPER PANEL GARNISH 
  6. INSTALL FLOOR SHIFT LEVER KNOB SUB-ASSEMBLY 
    1. Install the floor shift lever knob sub-assembly.
  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 
    1. Install the shift lever knob sub-assembly.
  8. CONNECT BATTERY NEGATIVE TERMINAL 
  9. INSPECT SHIFT LEVER POSITION (See  ADJUSTMENT   ) 
  10. ADJUST SHIFT LEVER POSITION (See  ADJUSTMENT   ) 
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.