Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Lexus GS 430FACTORY OEM SERVICE PROCEDURE
Service Data: Notes
SERVICE DATA
| Line pressure (Fluid temperature): 50 to 80°C (122 to 176°F) Engine Idling |
D position | 355 to 425 kPa (3.6 to 4.2 kgf*cm2 , 51 to 62 psi) |
| R position | 631 to 731 kPa (6.4 to 7.5 kgf*cm2 , 92 to 106 psi) | |
| Line pressure (Fluid temperature): 50 to 80°C (122 to 176°F) AT stall (Throttle valve fully opened) |
D position | 1, 277 to 1, 387 kPa (13 to 14.1 kgf*cm2 , 185 to 201 psi) |
| R position | 1, 462 to 1.670 kPa (15 to 17 kgf*cm2 , 212 to 242 psi) | |
| Engine stall revolution | D and R positions | 2, 400 +- 150 rpm |
| Time lag | N→D position N→R position |
Less than 1.2 seconds Less than 1.5 seconds |
| Engine idle speed (A/C OFF) |
N position | 750 +- 50 rpm |
| Drive plate runout Torque converter runout |
Max. Max. |
0.20 mm (0.0079 in.) 0.30 mm (0.0118 in.) |
| Extension housing oil drive in depth from flat end | 2.0 mm (0.079 in.) | |
| Shift schedule | Differential gear ratio 3.769 | |
| D, 6 position | ||
| (Throttle valve fully opened) | 1→2 | 54 to 63 km/h (34 to 39 mph) |
| 2→3 | 91 to 100 km/h (57 to 62 mph) | |
| 3→4 | 136 to 149 km/h (85 to 93 mph) | |
| 4→5 | 181 to 195 km/h (112 to 121 mph) | |
| 5→6 | 241 to 257 km/h (150 to 160 mph) | |
| 6→5 | 235 to 247 km/h (146 to 153 mph) | |
| 5→4 | 175 to 185 km/h (109 to 115 mph) | |
| 4→3 | 128 to 138 km/h (80 to 86 mph) | |
| 3→2 | 81 to 87 km/h (50 to 54 mph) | |
| 2→1 | 38 to 43 km/h (24 to 27 mph) | |
| (Throttle valve fully closed) | 5→6 | 62 to 68 km/h (39 to 42 mph) |
| 6→5 | 50 to 55 km/h (31 to 34 mph) | |
| 5 position | ||
| (Throttle valve fully opened) | 1→2 | 54 to 63 km/h (34 to 39 mph) |
| 2→3 | 91 to 100 km/h (57 to 62 mph) | |
| 3→4 | 136 to 149 km/h (85 to 93 mph) | |
| 4→5 | 181 to 195 km/h (112 to 121 mph) | |
| 6→5 | 241 to 253 km/h (150 to 157 mph) | |
| 5→4 | 175 to 185 km/h (109 to 115 mph) | |
| 4→3 | 128 to 138 km/h (80 to 86 mph) | |
| 3→2 | 81 to 87 km/h (50 to 54 mph) | |
| 2→1 | 38 to 43 km/h (24 to 27 mph) | |
| 4 position | ||
| (Throttle valve fully opened) | 1→2 | 54 to 63 km/h (34 to 39 mph) |
| 2→3 | 91 to 100 km/h (57 to 62 mph) | |
| 3→4 | 136 to 149 km/h (85 to 93 mph) | |
| 5→4 | 194 to 205 km/h (121 to 127 mph) | |
| 4→3 | 128 to 138 km/h (80 to 86 mph) | |
| 3→2 | 81 to 87 km/h (50 to 54 mph) | |
| 2→1 | 38 to 43 km/h (24 to 27 mph) | |
| 3 position | ||
| (Throttle valve fully opened) | 1→2 | 54 to 63 km/h (34 to 39 mph) |
| 2→3 | 91 to 100 km/h (57 to 62 mph) | |
| 4→3 | 142 to 152 km/h (88 to 94 mph) | |
| 3→2 | 81 to 87 km/h (50 to 54 mph) | |
| 2→1 | 38 to 43 km/h (24 to 27 mph) | |
| 2 position | ||
| (Throttle valve fully opened) | 1→2 | 54 to 63 km/h (34 to 39 mph) |
| 3→2 | 95 to 105 km/h (59 to 65 mph) | |
| 2→1 | 38 to 43 km/h (24 to 27 mph) | |
| 1 position | ||
| (Throttle valve fully opened) | 2→1 | 38 to 43 km/h (24 to 27 mph) |
| Lock up point | Throttle valve opening 5% | |
| D, 6, 5 position | ||
| 6th gear | Lock up ON | 66 to 72 km/h (41 to 45 mph) |
| Lock up OFF | 63 to 69 km/h (39 to 43 mph) | |
| 5th gear | Lock up ON | 54 to 59 km/h (34 to 37 mph) |
| Lock up OFF | 50 to 55 km/h (31 to 34 mph) | |
| 4 position | ||
| 4th gear | Lock up ON | 54 to 59 km/h (34 to 37 mph) |
| Lock up OFF | 50 to 55 km/h (31 to 34 mph) | |
| Flex lock up point | Throttle valve opening 3% | |
| D, 6, 5, 4 (Acceleration) | ||
| 6th gear | Flex lock up ON | 54 to 59 km/h (34 to 37 mph) |
| Flex lock up OFF | 52 to 57 km/h (32 to 35 mph) | |
| 5th gear | Flex lock up ON | 43 to 48 km/h (27 to 30 mph) |
| Flex lock up OFF | 41 to 46 km/h (25 to 29 mph) | |
| 4th gear | Flex lock up ON | 31 to 36 km/h (19 to 22 mph) |
| Flex lock up OFF | 29 to 34 km/h (18 to 21 mph) | |
| 3th gear | Flex lock up ON | 31 to 36 km/h (19 to 22 mph) |
| Flex lock up OFF | 21 to 25 km/h (13 to 16 mph) | |
NOTE:
- All shift point values indicated in the above tables are actual values. Therefore, if checking a shift point with a chassis dynamometer, keep in mind that there is a range of error in the chassis dynamometer indication.
- If checking a shift point against the speed indicated on the speedometer, remember to consider the speedometer correction rate and range of error in the tester indication.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
