Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Lexus GS 430FACTORY OEM SERVICE PROCEDURE
Inspection Procedure
- CHECK POWER WINDOW OPERATION FUNCTION AFTER ENGINE SWITCH IS TURNED OFF
- Check the power window operation function after the engine switch is turned OFF.
Result:
RESULT CHARTProceed to Driver side door is opened within 43 seconds but power window can still operate A 43 seconds pass and the power windows can still operate B B: REPLACE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY
A: Go to next step
- CHECK OPERATION OF FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
- Open the driver side door and check that the map light illuminates.
OK:
Map light illuminates.
NG: GO TO LIGHTING SYSTEM
OK: REPLACE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY
- Open the driver side door and check that the map light illuminates.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
