2006 Lexus RX 330 FWDFACTORY OEM SERVICE PROCEDURE

Monitor Description

The idle speed is controlled by the Electronic Throttle Control System (ETCS).

The ETCS is composed of the throttle motor, which operates the throttle valve, and the throttle position sensor, which detects the opening angle of the throttle valve.

The ECM controls the throttle motor to provide the proper throttle valve opening angle to obtain the target idle speed.

The ECM regulates the idle speed by opening and closing the throttle valve using the ETCS. The ECM concludes that the idle speed control ECM function is malfunctioning if: 1) the actual idle RPM varies more than the specified amount 5 times or more during a drive cycle, or 2) a learning value of the idle speed control remains at the maximum or minimum 5 times or more during a drive cycle. The ECM will turn on the MIL and set a DTC.

Example:

If the actual idle RPM varies from the target idle RPM by more than 200 (*1) rpm 5 times during a drive cycle, the ECM will turn on the MIL and a DTC will be set.

*1: RPM threshold varies with engine load.

Fig 1: Idle Engine RPM Graph
G04087291Courtesy of Β© TOYOTA, LICENSE AGREEMENT TMS1002
DTC REFERENCE

DTC No. DTC Detection Condition Trouble Area
P0505 Idle speed continues to vary greatly from target speed (1 trip detection logic)
  • Electronic throttle control system
  • Air induction system
  • PCV hose connection
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.