Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
System Outline
The driver can adjust the angle of the outer mirror at his or her will by operating the remote control mirror SW.
- Electric Storage System
When the ignition SW is turned to "OFF" from "ACC" or "ON", the signal is communicated to the door ECU, and the outer rear view mirror motor is controlled to fold the mirror. When the ignition SW is turned to "ON" or "ACC" from "OFF", the signal is communicated and the outer rear view mirror motor is controlled to unfold the mirror.
- Reverse Interlock System
If the shift lever is shifted to R position, outer mirror is automatically adjusted so that the driver sees the lower area.
- Foot Light
The light is installed at the lower part of the outer mirror to light up the road surface near the doors when the driver or passengers getting on and off.
Conditions for lighting on (Shift lever P position)
* Unlock operation by the wireless control
* Unlock operation by the central door lock SW
Conditions for lighting off
* Lock operation by the central door lock SW
* When above conditions are not satisfied, after about 15 seconds set by the timer or the shift lever is shifted to the positions except P position. (Ignition SW at ON position)
- Memory System
The mirror is returned to the position memorized before by operating the memory SW. The driver' power seat and the power tilt telescopic also operates in the same way.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.