2006 Lexus GS 430FACTORY OEM SERVICE PROCEDURE

Fail-Safe Chart

  1. Description 
    1. If a hall IC built-in power window regulator motor malfunctions, the applicable power window components enter fail-safe mode. In this mode, power window system operates as follows:

      Power Window Control System 

      FAIL-SAFE CHART

      Power window function Engine switch status Power window operation Jam protection function
      Manual UP (switch full pulled up and held) Engine switch on (IG) Operate Does not operate
      Manual DOWN Engine switch on (IG) Operate Does not operate
      Key-linked open - Does not operate -
      Key-linked close - Does not operate Operates
      Wireless transmitter-linked open - Does not operate -
      Manual UP (switch full pulled up and held) Engine switch off (key-off function operates) Does not operate Operates
      Manual DOWN Engine switch off (key-off function operates) Does not operate -
      AUTO UP Engine switch off (key-off function operates) Does not operate Operates
      AUTO DOWN Engine switch off (key-off function operates) Does not operate -
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.