Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
System Description
- POWER MIRROR CONTROL SYSTEM DESCRIPTIONÂ
This system has following functions: automatic glare-resistant electrochromic (EC) mirror, reverse shift-linked mirror, electrical remote control type mirror, memory function, rear window defogger-linked mirror defogger and wiper-linked mirror defogger.
- FUNCTION OF MAIN COMPONENTÂ MAIN COMPONENT FUNCTION
Components Function Vertical mirror motor Receives signal from door ECU and adjusts remote control mirror vertically. Horizontal mirror motor Receives signal from door ECU and adjusts remote control mirror horizontally. Mirror retract motor(1) Receives signal from door ECU, and retracts and returns remote control mirror. Mirror defogger Receives signal from door ECU and starts mirror defogger. EC mirror cell Varies reflection rate of mirror through function of EC elements. Mirror retract switch(1) Retracts and returns remote control mirror. Mirror retract and return signals are sent to door ECU through driver side J/B ECU. Mirror master switch Consists of R and L switches. One must be chosen before mirror control switches can be operated. Mirror control switch After selecting R or L switch, RIGHT, LEFT, UP and DOWN control switches change angle of mirror. Mirror signals are sent to door ECU through driver side J/B ECU. Mirror position sensor Detects remote control mirror position. This data is detected by door ECU. Set switch Memory switch When set switch and memory switch are pressed simultaneously, SET, 1 or 2 switch is input to driver door ECU and remote control mirror position is recorded. Then, when memory switch is pressed, 1 or 2 switch is input to driver door ECU and remote control mirror position changes according to memory. (1) w/ Retractable mirror - SYSTEM OPERATIONÂ
The remote control mirror has following features:
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
