Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Lexus IS 300 Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Service Data
SERVICE DATA - AUTOMATIC TRANSMISSION
| Line pressure (Wheel locked) | Β | |
| Β | Idling | Β |
| D position | 390 - 460 kPa (4.0 - 4.7 kgf.cm2 , 57 - 67 psi) | |
| R position | 0 | |
| Stall | Β | |
| D position | 1, 200 - 1, 360 kPa (12.2 - 13.8 kgf.cm2 , 174 - 196 psi) | |
| R position | 1, 640 - 1, 960 kPa (16.7 - 19.8 kgf.cm2 , 238 - 282 psi) | |
| Engine stall revolution (D position) | 2, 700 Β± 150 rpm | |
| Time lag | N β D position | Less than 1.2 seconds |
| N β R position | Less than 1.5 seconds | |
| Engine idle speed (N position and A/C OFF) | 700 Β± 50 rpm | |
| Drive plate runout | Max. | 0.20 mm (0.0079 in.) |
| Torque converter clutch sleeve runout | Max. | 0.30 mm (0.0118 in.) |
| Torque converter clutch installation (Correct distance) | More than 0.1 mm (0.004 in.) | |
| Shift schedule (NORM and PWR mode) | Β | |
| Differential gear ratio 3.909 | Β | |
| D, 4 position | Β | |
| (Throttle valve fully opened) | 1 β 2 | 47 - 59 km/h (29 - 37 mph) |
| 2 β 3 | 77 - 88 km/h (48 - 55 mph) | |
| 3 β 4 | 118 - 133 km/h (73 - 83 mph) | |
| 4 β 5 | 168 - 185 km/h (104 - 115 mph) | |
| 5 β 4 | 163 - 176 km/h (101 - 109 mph) | |
| 4 β 3 | 107 - 118 km/h (66 - 73 mph) | |
| 3 β 2 | 60 - 66 km/h (37 - 41 mph) | |
| 2 β 1 | 32 - 38 km/ h (20 - 24 mph) | |
| (Throttle valve fully closed) | 4 β 5 | 37 - 43 km/h (23 - 27 mph) |
| 5 β 4 | 21 - 26 km/h (13 - 16 mph) | |
| 3 position | Β | |
| (Throttle valve fully opened) | 1 β 2 | 47 - 59 km/h (29 - 37 mph) |
| 2 β 3 | 77 - 87 km/h (48 - 54 mph) | |
| 4 β 3 | 123 - 134 km/h (76 - 83 mph) | |
| 3 β 2 | 60 - 66 km/h (37 - 41 mph) | |
| 2 β 1 | 32 - 38 km/h (20 - 24 mph) | |
| 2 position | Β | |
| (Throttle valve fully opened) | 1 β 2 | 47 - 59 km/h (29 - 37 mph) |
| 3 β 2 | 82 - 90 km/h (51 - 56 mph) | |
| 2 β 1 | 32 - 38 km/h (20 - 24 mph) | |
| L position | Β | |
| (Throttle valve fully opened) | 2 β 1 | 17 - 22 km/h (11 - 14 mph) |
| Shift schedule (SNOW mode) | Β | |
| Differential gear ratio 3.916 | Β | |
| D, 4 position | Β | |
| (Throttle valve fully opened) | 1 β 2 | 35 - 49 km/h (22 - 30 mph) |
| 2 β 3 | 55 - 73 km/h (34 - 45 mph) | |
| 3 β 4 | 84 - 109 km/h (52 - 68 mph) | |
| 4 β 5 | 121 - 151 km/h (75 - 94 mph) | |
| 5 β 4 | 64 - 88 km/h (40 - 55 mph) | |
| 4 β 3 | 38 - 54 km/h (24 - 34 mph) | |
| 3 β 2 | 17 - 31 km/h (11 - 19 mph) | |
| (Throttle valve fully closed) | 4 β 5 | 37 - 43 km/h (23 - 27 mph) |
| 5 β 4 | 21 - 26 km/h (13 - 16 mph) | |
| 3 position | Β | |
| (Throttle valve fully opened) | 1 β 2 | 35 - 49 km/h (22 - 30 mph) |
| 2 β 3 | 55 - 73 km/h (34 - 45 mph) | |
| 4 β 3 | 123 - 134 km/h (76 - 83 mph) | |
| 3 β 2 | 17 - 31 km/h (11 - 19 mph) | |
| 2 position | Β | |
| (Throttle valve fully opened) | 1 β 2 | 47 - 59 km/h (29 - 37 mph) |
| 3 β 2 | 82 - 90 km/h (51 - 56 mph) | |
| L position | Β | |
| (Throttle valve fully opened) | 2 β 1 | 17 - 22 km/h (11 - 14 mph) |
| Lock-up point | (Throttle valve opening 5 %) | Β |
| 5th gear (D position) | Lock-up ON | 53 - 59 km/h (33 - 37 mph) |
| Β | Lock-up OFF | 52 - 58 km/h (32 - 36 mph) |
| 4th gear (4 position) | Lock-up ON | 53 - 59 km/h (33 - 37 mph) |
| Β | Lock-up OFF | 52 - 58 km/h (32 - 36 mph) |
| Flex lock-up point | Β | |
| (Throttle valve opening 3 %) | Β | |
| D position (When accelerating) | Β | |
| 5th gear | Lock-up ON | 37 - 43 km/h (23 - 27 mph) |
| Β | Lock-up OFF | 36 - 41 km/h (22 - 25 mph) |
| 4th gear | Lock-up ON | 28 - 33 km/h (17 - 32 mph) |
| Β | Lock-up OFF | 27 - 32 km/h (18 - 20 mph) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
