2004 Lexus RX 330 FWDFACTORY OEM SERVICE PROCEDURE

Torque Specification

Torque Specification

Part Tightened N.m kgf.cm ft.lbf
Fuel delivery pipe sub-assy x Intake manifold 10 102 7
Fuel delivery pipe No. 2 x Intake manifold 10 102 7
Fuel pipe No. 2 union bolt x Fuel delivery pipe No. 2 33 331 24
Fuel pressure pulsation damper assy x Fuel delivery pipe sub-assy 33 331 24
Fuel pipe sub-assy No, 1 x Intake manifold 20 199 14
Intake air surge tank x Intake manifold 26 286 21
Surge tank stay No. 2 x Intake air connector assy 20 199 14
Surge tank stay No. 2 x Cylinder head sub-assy 20 199 14
Surge tank stay No. 1 x Intake air surge tank 20 199 14
Surge tank stay No. 1 x Cylinder head sub-assy 20 199 14
Engine hunger No. 1 x Intake air surge tank 20 199 14
Engine hunger No. 1 x Cylinder head sub-assy 20 199 14
Pressure feed tube assy x Engine hunger No. 1 7.8 80 69 in.lbf
Emission control valve set x Emission control valve bracket 8.0 82 71 in.lbf
Air cleaner cap sub-assy x Air cleaner case sub-assy 5.0 51 44 in.lbf
Cowl top panel sub-assy outer x Body 5.0 51 44 in.lbf
Front shock absorber RH x Body 80 815 59
Front shock absorber LH x Body 80 815 59
Fuel tank side plate x Fuel tank bracket 30 306 22
Fuel tank assy x Body 20 200 14
Fuel tank band sub-assy RH x Body 39 400 29
Fuel tank band sub-assy LH x Body 39 400 29
Fuel tank protector sub-assy No. 1 x Fuel tank band sub-assy RH 5.5 56 49 in.lbf
Fuel tank protector sub-assy No. 1 x Fuel tank band sub-assy LH 5.5 56 49 in.lbf
Fuel tank protector No. 1 x Fuel tank band sub-assy LH 5.5 56 49 in.lbf
Fuel tank protector No. 1 x Fuel tank assy 5.5 56 49 in.lbf
Exhasut pipe support bracket No. 4 x Body (4WD Drive type) 22 224 16
Chapter Navigation
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.