2004 Lexus LS 430FACTORY OEM SERVICE PROCEDURE

Air Conditioner

AIR CONDITIONER CUSTOMIZE PARAMETERS

DISPLAY (ITEM) DEFAULT CONTENTS SETTING
SET TEMP SHIFT (Set Temperature Shift) NORMAL To control with the shifted temperature against the display temperature. +2C / +1C /NORMAL -1C / -2C
AIR INLET MODE (Air Inlet Mode) AUTO In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATED mode. MANUAL / AUTO
COMPRESSOR MODE (Compressor Mode) AUTO Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF. MANUAL / AUTO
DMPRS/DEF OPER (Compressor/Air Inlet DEF Operation) LINK Function to turn the A/C ON automatically linking with the FRONT DEF button when A/C is OFF. NORMAL / LINK
MOTOR INITIALIZ (Step Motor Initializing (IG/off)) OFF Function to initialize the step motor after the ignition switch is OFF. ON / OFF
EVAP CTRL (External Variable Control OFF) AUTO Function to set the evaporator control to the AUTOMATIC position (AUTO) to save power or to the coldest position (MANUAL) to dehumidify the air and to prevent the windows from fogging up. MANUAL / AUTO
GAS SENS SHIFT (Shift Emission Gas Sensor Sensitivity) NORMAL Function to change the sensitivity of the exhaust gas sensor. MU MORE /MORE /LI MORE / NORMAL /LI LESS / LESS / MU LESS
AUTO MODE (Cancel Auto Mode) AUTO Function to swing the vent vans automatically when A/C is ON. MANUAL / AUTO
BUTTON PRS BUS (Cancel Operating Switch Sound) ON Function to sound a buzzer when a button is pressed. OFF / ON
FILTER SENS (Shift Filter Clog Sensitivity) NORMAL Function to change the sensitivity of the air conditioning filter choking sensor. LESS / NORMAL / MORE
FOOT AIR LEAK (Cancel Air Outlet Foot II) ON Function to cut off the airstream felt underfoot while the vehicle is moving. OFF / ON
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.