Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Lexus ES 330FACTORY OEM SERVICE PROCEDURE
Service Data
Identifying Lubrication Service Data
| Oil pressure | at idle speed | 29 kPa (0.3 kgf/cm2 ,43 psi) or more |
| at 3,000 rpm | 245 to 539 kPa (2.5 to 5.5 kgf/cm2 , 36 to 78 psi) | |
| Oil pump assy | ||
| Tip clearance | Standard | 0.06 to 0.18 mm (0.0024 to 0.0071 in.) |
| Maximum | 0.35 mm (0.0138 in.) | |
| Body clearance | Standard | 0.250 to 0.325 mm (0.0098 to 0.0128 in.) |
| Maximum | 0.30 mm (0.0118 in.) | |
| Side clearance | Standard | 0.03 to 0.09 mm (0.0012 to 0.0035 in.) |
| Maximum | 0.15 mm (0.0059 in.) | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.