Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Lexus RX 300 AWDFACTORY OEM SERVICE PROCEDURE
Service Data
CHARGING SERVICE SPECIFICATIONS
| Battery | Voltage | at 20°C (68°F) | 12.5 - 12.9 V |
|---|---|---|---|
| Drive belt | Tension | ||
| New belt | 175 +/- 5 lbf | ||
| Used belt | 115 +/- 20 lbf | ||
| Generator L3B type | Rated output | 12 V 120 A | |
| Rotor coil resistance | 2.1 -2.5 ohm | ||
| Slip ring diameter | STD | 14.2 - 14.4 mm (0.559 - 0.567 in.) | |
| Limit | 12.8 mm (0.504 in.) | ||
| Brush exposed length | STD | 10.5 mm (0.413 in.) | |
| Limit | 1.5 mm (0.059 in.) | ||
| Generator SC1 type | Rated output | 12 V 120 A | |
| Rotor coil resistance | 2.3 - 2.7 ohm | ||
| Slip ring diameter | STD | 14.2 - 14.4 mm (0.559 - 0.567 in.) | |
| Limit | 14.0 mm (0.551 in.) | ||
| Brush exposed length | STD | 10.5 mm (0.413 in.) | |
| Limit | 4.5 mm (0.177 in.) | ||
| Voltage regulator | Regulating voltage | L3B type | 13.5 - 15.1 V |
| SC1 type | 13.2 - 14.0 V |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.