WARNING: This page is about a different car, the 2005 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

TORQUE SPECIFICATION

Part Tightened	N.m	kgf.cm	ft.lbf
Transfer case lower protector x Transfer	18	184	13
Transfer x Transfer adaptor	24	240	17
Front bearing retainer sub-assy x Front case	11.5	117	8
Transfer case cover sub-assy x Front case	18	185	13
Output shaft companion flange sub-assy lock nut	118	1,200	87
Extension housing sub-assy rear x Case rear	12	120	9
Front case x Case rear	28	285	21
Gear shift fork No.2 x Transfer shift actuator assy	24	245	18
Shift shaft stopper x Case rear (VF4AM)	19	195	14
CTR differential lock fork sub-assy x Transfer shift actuator assy	24	245	18
Transfer shift actuator assy x Case rear	20	200	14
Case No. 1 plug (Filler plug) x Case rear	37	380	27
Case No.1 plug (Drain plug) x Case rear	37	380	27
Oil separator sub-assy x Case rear	7.8	80	69 in.lbf
Oil pump body sub-assy x Case rear	7.8	80	69 in.lbf
Transfer case plug x Front case	18.6	190	14

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Torque Specification

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?