Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Torque Specification
POWER STEERING VANE PUMP
| Part tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| POWER STEERING VANE PUMP | |||
| Vane pump housing rear x Vane pump housing front | 24 | 240 | 17 |
| Pressure port union | 83 | 850 | 61 |
| Suction port union set bolt | 13 | 130 | 9 |
| Vane pump assy x Vane pump bracket rear | 43 | 438 | 32 |
| Vane pump assy x Stud bolt | 22 | 224 | 16 |
| Vane pump pulley set nut | 44 | 449 | 32 |
| Pressure feed tube assy x Vane pump assy | 51 | 520 | 38 |
| Pressure feed tube assy clamp set bolt | 7.8 | 80 | 69 in.lbf |
STEERING LINK ASPOWERSY
| Part tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Control valve housing set bolt | 18 | 184 | 13 |
| Bering guide nut | 25 | 250 | 18 |
| Rack guide spring cap | 25 | 250 | 18 |
| Rack guide spring cap lock nut | 69 (65) | 700 (660) | 51 (48) |
| Power steering rack x Rack end | 103 (98) | 1,050 (1,000) | 76 (72) |
| Tie rod assy lock nut | 88 | 897 | 65 |
| Turn pressure tube union nut | 25 (23) | 250 (230) | 18 (17) |
| Power steering link assy set bolt and nut | 100 | 1,020 | 74 |
| Pressure feed and return tubes x Control valve housing | 44 (42) | 449 (428) | 32 (31) |
| Pressure feed tube clamp set bolt | 28 | 286 | 21 |
| Outlet return tube | 44 (42) | 449 (428) | 32 (31) |
| Tie rod end x steering knuckle | 91 | 928 | 67 |
| Stabilizer bar front bracket set bolt | 40 | 408 | 30 |
(): For use without SST
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.