WARNING: This page is about a different car, the 2005 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

1GF-FE:

Service Data - Lubrication (1GF-FE)

Oil pressure
	at idle speed	29 kPa (0.3 kgf/cm² , 4.2 psi) or more
	at 3,000 rpm	294 -- 588 kPa (3.0 -- 6.0 kgf/cm² , 43 -- 85 psi)
Oil pump
Tip clearance	Standard	0.06 -- 0.16 mm (0.0024 -- 0.0063 in.)
	Maximum	0.16 mm (0.0063 in.)
Side clearance	Standard	0.03 -- 0.09 mm (0.0012 -- 0.0035 in.)
	Maximum	0.09 mm (0.0035 in.)
Body clearance	Standard	0.250 -- 0.325 mm (0.0098 -- 0.0128 in.)
	Maximum	0.325 mm (0.0128 in.)

2UZ-FE:

Service Data - Lubrication (2UZ-FE)

Oil pressure
	at idle speed	29 kPa (0.3 kgf/cm² , 4.2 psi) or more
	at 3,000 rpm	294 -- 588 kPa (3.0 -- 6.0 kgf/cm² , 43 -- 85 psi)
Oil pump
Tip clearance	Standard	0.060 to 0.180 mm (0.0024 to 0.0071 in.)
	Maximum	0.18 mm (0.0071 in.)
Side clearance	Standard	0.030 to 0.090 mm (0.0012 to 0.0035 in.)
	Maximum	0.09 mm (0.0035 in.)
Body clearance	Standard	0.250 to 0.325 mm (0.0096 to 0.0128 in.)
	Maximum	0.325 mm (0.0128 in.)

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Service Data

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?