2003 Lexus LS 430FACTORY OEM SERVICE PROCEDURE

Service Data

WARNING: This page is about a different car, the 2005 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

1GF-FE: 

Service Data - Cooling (1GF-FE)

Water inlet w/ thermostat    
Valve opening temperature   80 -- 84°C (176 -- 183°F)
Valve lift at 95°C (203°F) 8 mm (0.31 in.) or more
Radiator cap    
Relief valve opening pressure Standard 93 -- 123 kPa (0.95 -- 1.25 kgf/cm2 , 13.5 -- 17.8 psi)
  Minimum 78 kPa (0.8 kgf/cm2 , 11.4 psi)

2UZ-FE: 

Service Data - Cooling (2UZ-FE)

Thermostat    
Valve opening temperature   80 -- 84°C (176 -- 183°F)
Valve lift at 95°C (203°F) 10 mm (0.39 in.) or more
Radiator cap    
Relief valve opening pressure Standard 93 -- 123 kPa (0.95 -- 1.25 kgf/cm2 , 13.5 -- 17.8 psi)
  Minimum 78 kPa (0.8 kgf/cm2 , 11.4 psi)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.