Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Lexus LS 430FACTORY OEM SERVICE PROCEDURE
Column Shift Assembly: Installation
WARNING: This page is about a different car, the 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
- Install shift lever assembly:
- Connect the shift lever assembly and transmission control cable. See steps 7 & 8 of REMOVAL .
- Connect the shift lever connector.
- Install the shift lever assembly with the 3 bolts.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf) .
- Install combination switch. See STEP 13 - INSTALL COMBINATION SWITCH WITH SPIRAL CABLE .
- Install column lower and upper panels. See STEP 15 - INSTALL LOWER INSTRUMENT FINISH PANELS .
- Install INSTRUMENT LOWER FINISH PANEL .
- Install steering wheel, see STEP 17 - INSTALL STEERING WHEEL .
- Install steering wheel pad, see STEP 18 - INSTALL STEERING WHEEL PAD .
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.