Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Lexus LS 430FACTORY OEM SERVICE PROCEDURE
Torque Specification
TIGHTENING TORQUE SPECIFICATION
| Part tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Drain plug x No.2 oil pan | 39 | 400 | 29 |
| Oil pump body cover x Oil pump body | 10 | 105 | 7 |
| Oil pump body x Plug for relief valve | 49 | 500 | 36 |
| Oil pump x Cylinder block : 12 mm head 14 mm head and 6 mm hexagon head |
15.5 30.5 |
160 310 |
11 22 |
| Oil strainer x Cylinder block, Oil pump | 7.5 | 80 | 66 in.lbf |
| No.1 oil pan x Oil pump, Rear oil seal retainer | 7.5 | 80 | 66 in.lbf |
| No. 1 oil pan x Cylinder block : 10 mm head 12 mm head |
7.5 28 |
80 290 |
66 in.lbf 21 |
| Oil pan baffle plate x No.1 oil pan | 7.5 | 80 | 66 in.lbf |
| No.2 oil pan x No.1 oil pan | 7.5 | 80 | 66 in.lbf |
| Oil level sensor x No.1 oil pan | 5.4 | 55 | 48 in.lbf |
| Crankshaft position sensor x Oil pump | 6.5 | 65 | 58 in.lbf |
| Oil filter bracket x Oil pump | 18 | 185 | 13 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
