2003 Lexus GS 430FACTORY OEM SERVICE PROCEDURE

Torque Specification

WARNING: This page is about a different car, the 2005 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION

Part tightened N.m kgf.cm ft.lbf
Compressor x Discharge hose 10 100 7
Compressor x Suction hose 10 100 7
Compressor x Engine (GS300) Bolt 52 530 38
Compressor x Engine (GS300) Nut 26 265 19
Compressor x Engine (GS430) 49 500 36
PS pump x Engine (GS300) 58 590 43
PS pump bracket x Engine (GS300) 52 530 38
Compressor bracket x PS pump bracket 52 530 38
Stay x Engine (GS430) 29 300 22
Pressure plate x Compressor 18 184 13.2
A/C unit x Liquid and suction tube 10 100 7
Evaporator x Tube and accessory 4.1 42 36 in.lbf
Expansion valve x Tube and accessory 4.1 42 36 in.lbf
Condenser x Discharge hose 10 100 7
Condenser x Liquid tube 10 100 7
Pressure switch x Liquid tube 10 100 7
ECT switch x Radiator 7.4 75 65 in.lbf
Suction line 10 100 7
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.