2003 Lexus GS 300FACTORY OEM SERVICE PROCEDURE

Torque Specification

WARNING: This page is about a different car, the 2005 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION

Part tightened N.m kgf.cm ft.lbf
Brake line union nut 15 155 11
Hydraulic brake booster clevis lock nut 25 260 19
Hydraulic brake booster x Pedal bracket 13 130 9
Bleeder plug 11 110 8
Parking brake pedal assembly x Body 13 130 9
Front brake caliper installation bolt 34 350 25
Front disc brake caliper x Flexible hose 30 310 22
Front disc brake torque plate x Steering knuckle 118 1,200 87
Rear disc brake caliper x Flexible hose 30 310 22
Rear disc brake caliper x Rear axle carrier 104 1,065 77
Reservoir set screw 1.7 17.5 15.2in.lbf
Oil pressure sensor x Hydraulic brake booster 81 830 60
Accumulator x Booster pump motor 54 550 36
Front speed sensor installation bolt 8.0 82 71 in.lbf
Front speed sensor harness clamp bolt 5.0 51 44 in.lbf
Rear speed sensor installation bolt 8.0 82 71 in.lbf
Rear speed sensor harness x Body 5.5 56 49 in.lbf
Rear speed sensor harness x Toe control arm 5.0 51 44 in.lbf
Rear seatback x Body 18 185 13
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.