WARNING: This page is about a different car, the 2004 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

CUSTOMIZE PARAMETERS LIGHT CONTROL

DISPLAY (ITEM)

DEFAULT

CONTENTS

SETTING

SENSITIVITY

NORMAL

To adjust the sensitivity of the lighting illumination. Refer to the *1 illustration.

LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2

DISP EX ON SEN

NORMAL

Changes the brightness when lowering lights such as the combination meter indicator lamp, A/C indicator lamp, and clock lamp. Refer to the illustration *2.

LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2

DISP EX OFF SEN

NORMAL

Changes the brightness when lowering lights such as the combination meter indicator lamp, A/C indicator lamp, and clock. Refer to the illustration *3.

LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2

DRL FUNCTION (⁽¹⁾)

ON/OFF of the DRL function.

ON / OFF

⁽¹⁾	w/ Daytime Running Light for U.S.A.

Illustration of *1

Fig 1: Adjusting Sensitivity Of Lighting Illumination

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Illustration of *2

Fig 2: Changing Brightness - DISP EX ON SEN

Illustration of *3

Fig 3: Changing Brightness - DISP EX OFF SEN

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Light Control: Notes

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?