Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Buzzer Sound Function
When the body ECU No. 1 receives the door lock signal from the door ECU via the door lock motor, during lock operation, the wireless door lock buzzer goes on once for approximately 0.1 second.
When the body ECU No. 1 receives the door unlock signal from the door ECU via the door lock motor, during unlock operation, the wireless door lock buzzer goes on twice for approximately 0.2 second at intervals of 0.1 second.
When the luggage door is unlocked and the body ECU No. 1 outputs the unlock signal, the wireless door lock buzzer goes on once for approximately 0.5 second.
When the body ECU No. 1 receives the lock signal from the transmitter while any door is open, the wireless door lock buzzer sounds for approximately 10 seconds. If the door is closed or if the unlock signal is received from the transmitter while the buzzer is sounding, the buzzer stops.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
