Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Lexus SC 430FACTORY OEM SERVICE PROCEDURE
Power Mirror Control System: Inspection
- INSPECT ELECTRO CHROMIC OUTER MIRROR OPERATION
- Disconnect the outer mirror connector.
- Connect the positive (+) lead from the dry through battery (1.5 V) to terminal 7 and the negative (-) lead to terminal 15, then check that the mirror surface becomes "dark".
- Reconnect them to the dry cell battery in the reverse order, then check that the mirror surface becomes "bright".
If the operation is not as specified, replace the mirror assembly.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.