Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Lexus ES 300FACTORY OEM SERVICE PROCEDURE
Torque Specifications
WARNING: This page is about a different car, the 2004 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Starter Mounting Bolts | |||
| 4-Cylinder | 29 (39) | ||
| V6 | 27 (37) | ||
| INCH Lbs. (N.m) | |||
| Air Cleaner | |||
| Assembly Bolts | 44 (5) | ||
| Bracket Bolts | |||
| 4-Cylinder | 115 (13) | ||
| V6 | 106 (12) | ||
| Cap Bolts | 44 (5) | ||
| Case Bolts | 44 (5) | ||
| Inlet Assembly Bolts | 62 (7) | ||
| Battery | |||
| Hold Down Clamp Bolts | 49 (5.5) | ||
| Terminal Clamp Bolts | 31 (3.5) | ||
| Magnetic Switch | |||
| Starter Wire Nut | |||
| 4-Cylinder | 115 (13) | ||
| V6 | 87 (9.8) | ||
| Terminal "C" Nut | 88 (10) | ||
| Screws | 66 (7.5) | ||
| Starter Through Bolts | 53 (6.0) | ||
| Bolt | 115 (13) | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.