WHEEL ALIGNMENT SPECIFICATIONS (LS430)

Application

Preferred

Range

With Air Suspension

Camber ⁽¹⁾

Front

-0.25

-1.0 To 0.5

Rear

-1.55

-2.3 To -0.8

Caster ⁽¹⁾

7.25

6.5 To 8.0

Steering Axis Inclination ⁽¹⁾

9.25

8.5 To 10.0

Toe-In ⁽²⁾

Front

.04 (1.0)

-.04 To .12 (-1.0 To 3.0)

Rear

.12 (3.0)

.04 To .20 (1.0 To 5.0)

Toe-In ⁽¹⁾

Front

.10

-.10 To .30

Rear

.30

.10 To .50

Toe-Out On Turns ⁽¹⁾

Inner

43.5

.....

Outer

37.33

.....

Without Air Suspension

Camber ⁽¹⁾

Front

.33

-.42 To 1.08

Rear

-1.0

-1.75 To -.25

Caster ⁽¹⁾

6.75

6.0 To 7.5

Steering Axis Inclination ⁽¹⁾

9.0

8.25 To 9.75

Toe-In ⁽²⁾

Front

.04 (1.0)

-.04 To .12 (-1.0 To 3.0)

Rear

.12 (3.0)

.04 To .16 (1.0 To 4.0)

Toe-In ⁽¹⁾

Front

.10

-.10 To .30

Rear

.30

.10 To .50

Toe-Out On Turns ⁽¹⁾

Inner

43.5

.....

Outer

37.33

.....

Without Air Suspension (Sport Package)

Camber ⁽¹⁾

Front

-0.08

-0.83 To 0.67

Rear

-1.00

-1.75 To -.25

Caster ⁽¹⁾

6.67

5.92 To 7.42

Steering Axis Inclination ⁽¹⁾

9.08

8.33 To 9.83

Toe-In ⁽²⁾

Front

.04 (1.0)

-.04 To .12 (-1.0 To 3.0)

Rear

.12 (3.0)

.04 To .16 (1.0 To 4.0)

Toe-In ⁽¹⁾

Front

.10

-.10 To .30

Rear

.30

.10 To .50

Toe-Out On Turns ⁽¹⁾

Front

43.5

.....

Rear

37.33

.....

⁽¹⁾	Measurement in degrees.

⁽²⁾	Measurement in inches (mm).

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Wheel Alignment Specifications: LS430

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?