2001 Lexus LS 430FACTORY OEM SERVICE PROCEDURE

Engine Controls - Service & Adjustment Specifications: Capacities

ES300 FLUID CAPACITIES

Application (1) Quantity
Crankcase (Includes Filter) (2) 5.0 Qts. (4.7L)
Cooling System (Includes Heater) 9.7 Qts. (9.2L)
Automatic Transaxle (Toyota Type T-IV ATF)
Drain & Refill 3.7 Qts. (3.5L)
Dry Fill 8.7 Qts. (8.3L)
Power Steering Fluid (Dexron-III) .8 Qt. (.8L)
(1) Approximate quantity is listed.
(2) Use an API SJ energy conserving engine oil.
GS300 FLUID CAPACITIES

Application (1) Quantity
Crankcase (Includes Filter) (2) 5.7 Qts. (5.4L)
Cooling System (Includes Heater) 8.1 Qts. (7.7L)
Automatic Transmission (Toyota Type T-IV ATF)
Drain & Refill 2.1 Qts. (2.0L)
Dry Fill 8.7 Qts. (8.2L)
Differential (SAE 80W-90/API GL-5) 1.4 Qts. (1.3L)
Power Steering Fluid (Dexron-III) 1.1 Qts. (1.0L)
(1) Approximate quantity is listed.
(2) Use an API SJ energy conserving engine oil.
GS430 FLUID CAPACITIES

Application (1) Quantity
Crankcase (Includes Filter) (2) 5.5 Qts. (5.2L)
Cooling System (Includes Heater) 9.5 Qts. (9.0L)
Automatic Transmission (Toyota Type T-IV ATF)
Drain & Refill 1.9 Qts. (1.8L)
Dry Fill 9.4 Qts. (8.9L)
Differential (SAE 80W-90/API GL-5) 1.4 Qts. (1.3L)
Power Steering Fluid (Dexron-III) 1.1 Qts. (1.0L)
(1) Approximate quantity is listed.
(2) Use an API SJ energy conserving engine oil.
LS430 FLUID CAPACITIES

Application (1) Quantity
Crankcase (Includes Filter) (2) 4.8 Qts. (4.5L)
Cooling System (Includes Heater) 10.0 Qts. (9.5L)
Automatic Transmission (Toyota Type T-IV ATF)
Drain & Refill 1.9 Qts. (1.8L)
Dry Fill 9.4 Qts. (8.9L)
Differential (SAE 80W-90/API GL-5) 1.4 Qts. (1.3L)
Power Steering Fluid (Dexron-III) 1.1 Qts. (1.0L)
(1) Approximate quantity is listed.
(2) Use an API SJ energy conserving engine oil.
LX470 FLUID CAPACITIES

Application (1) Quantity
Crankcase (Includes Filter) (2) 7.2 Qts. (6.8L)
Cooling System (Includes Heater)
With Front Heater Only 15.6 Qts. (14.8L)
With Front & Rear Heater 16.2 Qts. (15.3L)
Automatic Transmission (Dexron-III)
Drain & Refill 2.0 Qts. (1.9L)
Dry Refill 12.4 Qts. (11.7L)
Differential
Front Axle (SAE 80W-90/API GL-5) 1.8 Qts. (1.7L)
Rear Axle
With Limited Slip Differential (LSD) (Hypoid Gear Oil LSD SAE 80W-90/API GL-5) 3.5 Qts. (3.3L)
With Rear Differential Lock (SAE 80W-90/API GL-5) 3.4 Qts. (3.2L)
Without Rear Differential Lock (SAE 80W-90/API GL-5) 3.5 Qts. (3.3L)
Power Steering Fluid (Dexron-III) .9 Qt. (.8L)
Transfer Case (SAE 75W-90/API GL-5) 1.4 Qts. (1.3L)
Active Height Control (AHC) Suspension Fluid (AHC Suspension Fluid Part No. 08886-01805) 3.9 Qts. (3.7 L)
(1) Approximate quantity is listed.
(2) Use an API SJ energy conserving engine oil.
RX300 FLUID CAPACITIES

Application (1) Quantity
Crankcase (Includes Filter) (2) 5.0 Qts. (4.7L)
Cooling System (Includes Heater) 9.5 Qts. (9.0L)
Automatic Transaxle (Toyota Type T-IV ATF)
2WD
Drain & Refill 3.7 Qts. (3.5L)
Dry Refill 8.7 Qts. (8.3L)
4WD
Drain & Refill 4.3 Qts. (4.1L)
Dry Refill 9.7 Qts. (9.2L)
Differential
4WD (SAE 80W-90/API GL-5) 1.0 Qt. (.9L)
Power Steering Fluid (Dexron-III) 1.2 Qts. (1.1L)
Transfer Case
4WD (SAE 80W-90/API GL-5) 1.0 Qt. (.9L)
(1) Approximate quantity is listed.
(2) Use an API SJ energy conserving engine oil.
IS300 FLUID CAPACITIES

Application (1) Quantity
Crankcase (Includes Filter) (2) 5.7 Qts. (5.4L)
Cooling System (Includes Heater) 7.9 Qts. (7.5L)
Automatic Transmission (Toyota Type T-IV ATF)
Drain & Refill 2.5 Qts. (2.4L)
Dry Fill 8.5 Qts. (8.0L)
Differential (SAE 80W-90/API GL-5) 1.2 Qts. (1.1L)
Power Steering Fluid (Dexron-III) 1.0 Qts. (0.9L)
(1) Approximate quantity is listed.
(2) Use an API SJ energy conserving engine oil.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.