2001 Lexus ES 300FACTORY OEM SERVICE PROCEDURE

Anti-Lock Brake System (Including With VSC) DTCS

ANTI-LOCK BRAKE SYSTEM (INCLUDING WITH VSC) DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION

DTC Description
C0278/11 Open or short circuit of ABS solenoid relay circuit
C0279/12 B+ short circuit of ABS solenoid relay circuit
C0273/13 Open or short circuit of ABS motor relay circuit
C0274/14 B+ short circuit of ABS motor relay circuit
C0226/21 Open or short circuit of ABS (& BA &TRAC & VSC) actuator solenoid circuit (SFR circuit)
C0236/22 Open or short circuit of ABS (& BA &TRAC & VSC) actuator solenoid circuit (SFL circuit)
C0246/23 Open or short circuit of ABS (& BA &TRAC & VSC) actuator solenoid circuit (SRR circuit)
C0256/24 Open or short circuit of ABS (& BA & TRAC & VSC) actuator solenoid circuit (SRL circuit)
C1225/25 Open or short circuit of ABS & BA & TRAC & VSC actuator solenoid circuit (SMC1 or SMC2 circuit)
C1226/26 Open or short circuit of ABS & BA & TRAC & VSC actuator solenoid circuit (SMV1 or SMV2 circuit)
C1227/27 Open or short circuit of ABS & BA & TRAC & VSC actuator solenoid circuit (SRC1 or SRC2 circuit)
C0200/31 Right front wheel speed sensor signal malfunction
C0205/32 Left front wheel speed sensor signal malfunction
C0210/33 Right rear wheel speed sensor signal malfunction
C0215/34 Left rear wheel speed sensor signal malfunction
C1241/41 Low battery positive voltage or abnormally high battery positive voltage
C1243/43 Malfunction in deceleration sensor (abnormal constant output)
C1244/44 Open or short circuit of deceleration sensor circuit
C1245/45 Malfunction in deceleration sensor
C1246/46 Malfunction in master cylinder pressure sensor
C1249/49 Open circuit of stop light switch circuit
C1251/51 Pump motor is locked Open circuit of pump motor circuit
ALWAYS ON Malfunction in ABS (& BA & TRAC & VSC) ECU
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.