Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Lexus SC 400FACTORY OEM SERVICE PROCEDURE
Cylinder Block Specifications
WARNING: This page is about a different car, the 2000 Lexus SC 300, 2000 Lexus GS 300, 1999 Lexus SC 300, and 1999 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER BLOCK
| Application | In. (mm) | |||
|---|---|---|---|---|
| Cylinder Bore | ||||
| Standard Diameter | 3.3858-3.3863 (86.000-86.012) | |||
| Maximum Diameter | 3.3866 (86.020) | |||
| Main Bearing Bore Inside Diameter (1) | ||||
| Size Mark "0" | 2.59922-2.59929 (66.0202-66.0220) | |||
| Size Mark "1" | 2.59929-2.59937 (66.0220-66.0240) | |||
| Size Mark "2" | 2.59937-2.59944 (66.0240-66.0258) | |||
| Size Mark "3" | 2.59944-2.59952 (66.0258-66.0278) | |||
| Size Mark "4" | 2.59952-2.59960 (66.0278-66.0300) | |||
| Size Mark "5" | 2.59960-2.59968 (66.0300-66.0320) | |||
| Size Mark "6" | 2.59968-2.59976 (66.0320-66.0340) | |||
| Size Mark "7" | 2.59976-2.59984 (66.0340-66.0360) | |||
| Maximum Deck Warpage | .0028 (.071) | |||
|
||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
