2000 Lexus GS 400FACTORY OEM SERVICE PROCEDURE

Cooling System Specifications

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2001 Lexus RX 300, 2001 Lexus LX 470, 2001 Lexus LS 430, 2001 Lexus IS 300, and 2001 Lexus GS 430. However, it is still accessible from the selected car via links, so may be relevant.
COOLING SYSTEM SPECIFICATIONS

Application Specification
Coolant Replacement Interval (1)
Coolant Capacity (2)
ES300 9.7 Qts. (9.2L)
GS300 8.1 Qts. (7.7L)
GS430 9.5 Qts. (9.0L)
IS300 7.9 Qts. (7.5L)
LS430 10.4 Qts. (9.8L)
LX470
With Front Heater 15.6 Qts. (14.8L)
With Front & Rear Heater 16.2 Qts. (15.3L)
RX 300 9.5 Qts. (9.0L)
Radiator Cap
Standard Pressure 13.5-17.8 psi
Minimum Pressure 11.4 psi
Thermostat Opening Temperature 176-183Β°F (80-84Β°C)
(1) Information not available from manufacturer.
(2) Includes heater core capacity.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.