Lubrication Specifications

1998 Lexus SC 300SECTION Lubrication Specifications
LUBRICATION SPECIFICATIONS

Material Condition Specification
Engine Oil (1) Ambient Temperature From 100°F (38°C) To Over -20°F (-29°C) SAE 5W-30
Engine Oil (1) Ambient Temperature From 0°F (-18°C) To Over 100°F (38°C) SAE 10W-30
Engine Coolant All 50/50 Mixture Distilled Water Ethylene Glycol
Power Steering Fluid All DEXRON II or III
Brake Fluid All SAE J1703 or DOT 3
Clutch Fluid All SAE J1703 or DOT 3
Automatic Transmission Fluid All DEXRON II or III
Manual Transmission Oil All SAE 75W-90 or 80W-90
Differential Oil Above -18°C (0°F) SAE 90
Differential Oil Below -18°C (0°F) SAE 80W or SAE 80W-90
(1) SAE 5W-30 is preferred, use oils displaying the API certification mark with the Starburst Symbol.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.