Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
System Testing: Notes
Identify symptom and perform corrective action as necessary. See SYSTEM TESTS INDEX & TROUBLE SHOOTING GUIDE table.
| Component | Symptom | Action Or TEST No. |
|---|---|---|
| All Meters, Gauges & Lights | No Display At All | TEST 1: . |
| " | 4 Indicator Needles Do Not Illuminate | Replace Circuit Plate |
| " | One Indicator Needle Does Not Illuminate | TEST 2: . |
| " | Entire Face Does Not Illuminate | Replace Circuit Plate |
| " | Face Not Illuminated At One Or More Locations | TEST 3 . |
| " | Brightness Does Not Change With Lights In OFF Or TAIL | TEST 4 . |
| " | Brightness Does Not Change When Rheostat Is Turned | TEST 5 . |
| " | Brightness Remains Dim With Light Switch OFF | Replace Circuit Plate |
| " | Brightness Does Not Go Out When Starter Is Operated | TEST 6 . |
| Speedometer | Does Not Operate While Driving | TEST 7 . |
| " | Display Is Faulty | Replace Meter |
| " | Vehicle Speed Sensor (VSS) Signal Faulty | TEST 8 . |
| Tachometer | Does Not Operate | TEST 9 . |
| " | Display Is Faulty | Replace Meter |
| Fuel Gauge | Does Not Operate Or Operation Is Abnormal | TEST 10 . |
| Fuel Level Warning | Warning Does Not Illuminate Or Always Illuminated | TEST 11 . |
| Engine Coolant Temp. Gauge | Does Not Operate Or Operation Is Abnormal | TEST 12 . |
| Odometer & Twin Trip Meter | Display Does Not Change While Driving | TEST 13 . |
| " | Display Is Reset When Ignition Turned Off | TEST 14 . |
| " | Abnormal Display | Replace Odo& Twin Trip Meter |
| Outside Air Temp. Display | Abnormal Display | TEST 15 . |
| Engine Oil Level Warning | Warning Does Not Illuminate | TEST 16 . |
| " | Warning Always Illuminated | TEST 17 . |
| Transmission PWR Indicator | Abnormal Operation Or Indicator Does Not Illuminate | TEST 18 . |
| CRUISE MAIN Indicator | Abnormal Operation Or Indicator Does Not Illuminate | TEST 19 . |
| O/D OFF Indicator | Abnormal Operation Or Indicator Does Not Illuminate | TEST 20 . |
| Shift Position Indicator | Abnormal Operation Or Indicator Does Not Illuminate | TEST 21 . |
| TRAC OFF Indicator | Abnormal Operation Or Indicator Does Not Illuminate | TEST 22 . |
| ABS Warning | Abnormal Operation Or Warning Does Not Illuminate | TEST 23 . |
| Hi-Beam Indicator | Abnormal Operation Or Indicator Does Not Illuminate | TEST 24 . |
| Turn Signal Indicator | Abnormal Operation Or Indicator Does Not Illuminate | TEST 25 . |
| Window Washer Warning | Abnormal Operation Or Warning Does Not Illuminate | TEST 26 . |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.