Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1997 Lexus LX 450FACTORY OEM SERVICE PROCEDURE
Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Intermediate Shaft-To-Main Shaft Universal Joint Bolt | 25 (34) | |||
| Link Joint Protector Bolts | 9 (12) | |||
| Steering Column Assembly-To-Support Set Nuts & Bolts | 18 (25) | |||
| Steering Column Hole Cover Set Bolts | 9 (13) | |||
| Steering Wheel Set Nut | 25 (34) | |||
| Steering Column-To-Steering Gear Sliding Yoke Sub-Assembly (1) | ||||
| Bolt A | 25 (34) | |||
| Bolt B | 25 (34) | |||
| Tilt Lever Retainer Nut | 11 (15) | |||
| INCH Lbs. (N.m) | ||||
| Compression Spring Bolt | 69 (7.8) | |||
| Dust Seal Bolt | 52 (5.9) | |||
| Steering Wheel Pad Screws | 78 (9.0) | |||
| Tilt Lever Assembly Set Bolt | 26 (2.9) | |||
| Tilt Lever Side Pawl Nut | 52 (5.9) | |||
| Turn Signal Bracket Bolt | 50 (5.7) | |||
|
||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.