1997 Lexus LS 400FACTORY OEM SERVICE PROCEDURE

Electrical Component Locator: Splices

SPLICES

Component Component Location
B1 In body harness, in left front door.
B2 In body harness, at left front door sill.
B3 In body harness, at left front door sill.
B4 In body harness, under center console.
B6 In body harness, in left rear door.
B7 In body harness, behind rear seat.
B8 In body harness, in left rear pillar.
B9 In body harness, left side of trunk.
B10 In body harness, left side of trunk.
B11 In body harness, rear of trunk.
B12 In body harness, near right quarterpanel.
B13 In body harness, at base of right rear pillar.
B14 In body harness, in right rear door.
B15 In body harness, at right rear door sill.
B16 In body harness, at right rear door sill.
B17 In body harness, at base or right center pillar.
B18 In body harness, at right front door sill.
B19 In body harness, in right front door.
B20 In body harness, at right front pillar.
B21 In body harness, at center of windshield header.
B22 In body harness, under driver's seat.
B23 In body harness, in driver's seat back.
B24 In body harness, under right front seat.
B25 In body harness, under right front seat.
E2 In engine harness, at right radiator support.
E3 In engine harness, at left radiator support.
E4 In engine harness, at left side of engine compartment.
E5 In engine harness, at left front of engine.
E6 In engine harness, at left front of engine.
I1 In dash harness, at left end of dash.
I2 In dash harness, at left end of dash.
I3 In dash harness, behind center of dash.
I4 In dash harness, at lower right end of dash.
I5 In dash harness, behind right end of dash.
I6 In dash harness, behind right end of dash.
I7 In dash harness, at right kick panel.
I8 In dash harness, at left side of dash.
I9 In dash harness, right of steering column.
I10 In dash harness, behind radio & player.
I11 In dash harness, right of radio.
I12 In dash harness, right of radio.
I13 In dash harness, at right side of dash.
I14 In dash harness, near stereo component amplifier.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.