Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
System Testing: Notes
Identify symptom and perform corrective action as necessary. See appropriate SYSTEM TESTS INDEX & TROUBLE SHOOTING GUIDE table.
| Component | Symptom | Action Or Fig. No. |
|---|---|---|
| All Meters, Gauges & Lights | No Display At All | See Figure |
| " | 4 Indicator Needles Do Not Illuminate | Replace Circuit Plate |
| " | One Indicator Needle Does Not Illuminate | See Figure |
| " | Entire Character Plate Does Not Illuminate | Replace Circuit Plate |
| " | Character Plate Not Illuminated At One Or More Locations | See Figure |
| " | Brightness Does Not Change With Lights In OFF Or TAIL | See Figure |
| " | Brightness Does Not Change When Rheostat Is Turned | See Figure |
| " | Brightness Remains Dim With Light Switch OFF | Replace Circuit Plate |
| " | Brightness Does Not Go Out When Starter Is Operated | See Figure |
| Speedometer | Does Not Operate While Driving | See Figure |
| " | Display Is Faulty | Replace Meter Lens |
| " | Vehicle Speed Signal (4P) Faulty | See Figure |
| Tachometer | Does Not Operate While Engine Is Running | See Figure |
| " | Display Is Faulty | Replace Meter Lens |
| Fuel Gauge | Does Not Operate Or Operation Is Abnormal | See Figure |
| Fuel Level Warning | Warning Does Not Illuminate Or Always Illuminated | See Figure |
| Engine Coolant Temp. Gauge | Does Not Operate Or Operation Is Abnormal | See Figure |
| Odometer & Twin Trip Meter | Display Does Not Change While Driving | See Figure |
| Twin Trip Meter | Display Is Reset When Ignition Turned Off | See Figure |
| " | Abnormal Display | Replace Odo & Twin Trip Meter |
| Outside Air Temp. Display | Abnormal Display | See Figure |
| Engine Oil Level Warning | Warning Does Not Illuminate | See Figure |
| " | Warning Always Illuminated | See Figure |
| Transmission PWR Indicator | Abnormal Operation Or Indicator Does Not Illuminate | See Figure |
| CRUISE MAIN Indicator | Abnormal Operation Or Indicator Does Not Illuminate | See Figure |
| O/D OFF Indicator | Abnormal Operation Or Indicator Does Not Illuminate | See Figure |
| Shift Position Indicator | Abnormal Operation Or Indicator Does Not Illuminate | See Figure |
| TRAC OFF Indicator | Abnormal Operation Or Indicator Does Not Illuminate | See Figure |
| ABS Warning | Abnormal Operation Or Warning Does Not Illuminate | See Figure |
| Hi-Beam Indicator | Abnormal Operation Or Indicator Does Not Illuminate | See Figure |
| Turn Signal Indicator | Abnormal Operation Or Indicator Does Not Illuminate | See Figure |
| Window Washer Warning | Abnormal Operation Or Warning Does Not Illuminate | See Figure |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.