Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1995 Lexus LS 400FACTORY OEM SERVICE PROCEDURE
Test No. 4, Communication Circuit
- Disconnect tilt/telescopic ECU connectors. Connect jumper wire between DLC2 terminal E1 and terminal Tc. See Figure. Turn ignition on. Check open door indicator light for any trouble codes. If Codes 14 and 15 are present, go to next step. If no codes are present, replace tilt/telescopic ECU.
- Disconnect driver's door ECU connectors. Connect jumper wire between DLC2 terminal E1 and terminal Tc. See Figure. Turn ignition on. Check open door indicator light for any trouble codes. If Codes 14 and 15 are present, go to next step. If no codes are present, replace driver's door ECU.
- Disconnect front passenger's door ECU connectors. Connect jumper wire between DLC2 terminal E1 and terminal Tc. See Figure. Turn ignition on. Check open door indicator light for any trouble codes. If Codes 14 and 15 are present, go to next step. If no codes are present, replace front passenger's door ECU.
- Disconnect driver's door and front passenger's door ECU connectors. Connect jumper wire between DLC2 terminal E1 and terminal Tc. See Figure. Turn ignition on. Check open door indicator light for any trouble codes. If Codes 14 and 15 are present, repair or replace wiring harness between driver's door ECU, body ECU and front passenger's door ECU. If no codes are present, repair or replace wiring harness between driver's door ECU, tilt/telescopic ECU and front passenger's door ECU.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.