Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1995 Lexus GS 300FACTORY OEM SERVICE PROCEDURE
Wheel Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Preferred | Range | ||||||
|---|---|---|---|---|---|---|---|---|
| Camber (1) | ||||||||
| Front | -0.25 | -1.0 To 0.50 | ||||||
| Rear | -1.00 | -1.50 To -0.50 | ||||||
| Caster (1) | 7.08 | 6.33 To 7.83 | ||||||
| Steering Axis Inclination (1) | 8.83 | - | ||||||
| Toe-In (2) | ||||||||
| Front | ||||||||
| 1995 | 0.04 (1.0) | 0.0 To 0.08 (0 To 2.0) | ||||||
| 1996 | 0.04 (1.0) | 0.04 To 0.12 (-1.0 To 3.0) | ||||||
| Rear | 0.16 (4.0) | 0.12 To 0.20 (3.0 To 5.0) | ||||||
| Toe-In (1) | ||||||||
| Front | 0.10 | -0.01 To 0.30 | ||||||
| Rear | 0.40 | 0.30 To 0.50 | ||||||
| Toe-Out On Turns (1) | ||||||||
| Inner | 38.75 | - | ||||||
| Outer | 32.0 | - | ||||||
|
||||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.