Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1992 Lexus ES 300 AutomaticFACTORY OEM SERVICE PROCEDURE
Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Ball Joint-To-Lower Arm Nut | 90 (122) |
| Ball Joint-To-Steering Knuckle Nut | 83 (112) |
| Brakeline Nuts | 11 (15) |
| Front Axle Nut | 137 (186) |
| Front Disc Caliper Bolts | 79 (107) |
| Rear Axle Carrier Upper Mounting Bolt | 152 (206) |
| Rear Axle Hub Bolts | 59 (80) |
| Rear Axle Nut | 90 (122) |
| Rear Disc Caliper Bolts | 34 (46) |
| Steering Knuckle-To-Shock Absorber Bolt | 224 (304) |
| Tie Rod End-To Steering Knuckle Nut | 36 (49) |
| Wheel Lug Nuts | 76 (103) |
| 3-Way Union Bolt | 12 (16) |
| INCH Lbs. (N.m) | |
| ABS ECU Mounting Screws | 28 (3) |
| Actuator Mounting Nuts | 48 (5) |
| Proportioning Valve Bolts | 78 (9) |
| Wheel Speed Sensor Mounting Bolt | 69 (8) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.