Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Land Rover Defender 90FACTORY OEM SERVICE PROCEDURE
DTC U3001-77: Control Module Improper Shutdown - Commanded position not reachable: Action
- Cycle the ignition and apply and release the park brake and retest
- If the fault persists, using the Jaguar Land Rover approved diagnostic equipment, check the anti-lock brake system control module for related Diagnostic Trouble Code(s) and complete the repair actions as necessary
- Refer to the relevant service information and test the battery, wiring harness and charging system
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.