2021 Land Rover Defender 110FACTORY OEM SERVICE PROCEDURE

Pathfinder Ecu Functions Not Available (SSM75778)

Publication date: 2022-06-28
Reference number: SSM75778

PATHFINDER ECU FUNCTIONS NOT AVAILABLE

PATHFINDER ECU FUNCTIONS NOT AVAILABLE

TECHNICAL SERVICE BULLETIN

Reference Number(s): SSM75778, Date of Issue:  June 28, 2022
LAND ROVER: Defender/L663; Discovery/L462; Discovery Sport/L550; New Range Rover Evoque/L551; Range Rover/L405; Range Rover Evoque/L538; Range Rover Sport/L494; Range Rover Velar/L560
SERVICE CATEGORY: Diagnostic Software Hardware

ISSUE

PATHFINDER is not able to identify the variant of some modules, this causes the following options to be deactivated within PATHFINDER:

  • Live Data
  • ECU functions
  • Update ECU
  • Replace ECU

CAUSE

The software loaded to the module is later than the software available within PATHFINDER.

ACTION

Use TOPIx Cloud to diagnose the concern.

If the option required is not available within TOPIx Cloud, a Technical Assistance (TA) must be raised.

NOTE: DO NOT replace the module unless advised through the TA if you experience this concern.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.