Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2017 Land Rover Discovery SEFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 2 and 3 Zone | 2.70 OZS. | 0.07 L | Polyalkylene Glycol SP-A2 | S | ||
| Air Cond Compressor Oil | Zone 4 | 4.00 OZS. | 0.11 L | Polyalkylene Glycol SP-A2 | S | ||
| Air Cond Refrigerant | 2 and 3 Zone | 1.80 LBS. | 0.81 KG | R-1234yf | S | ||
| Air Cond Refrigerant | Gas | 4 Zone Climate Control | 2.40 LBS. | 1.08 KG | R-1234yf | S | |
| Brake Fluid | N/A | N/A | SHELL DONAX YB DOT 4 ESL Fluid | S | |||
| Diesel Exhaust Fluid | 4.80 GALS. | 18.16 L | AdBlue, Aus 32 and Arla 32 Meeting: ISO 22241 and ISO 22241-1 | DO NOT overfill the DEF reservoir, or damage to the veicle may occur. | S | ||
| Engine Coolant | HEV Battery Circuit | 1.60 QTS. | 1.51 L | 50/50 mixture of HAVOLINE XLC Antifreeze and Water | S | ||
| Engine Coolant | w/2 Zone A/C and Fuel Fired Booster Heater | 10.15 QTS. | 9.6 L | 50/50 mixture of HAVOLINE XLC Antifreeze and Water | S | ||
| Engine Coolant | w/2 Zone A/C | 9.95 QTS. | 9.41 L | 50/50 mixture of HAVOLINE XLC Antifreeze and Water | S | ||
| Engine Coolant | w/4 Zone A/C and Fuel Fired Booster Heater | 12.05 QTS. | 11.4 L | 50/50 mixture of HAVOLINE XLC Antifreeze and Water | S | ||
| Engine Coolant | w/4 Zone A/C | 11.85 QTS. | 11.21 L | 50/50 mixture of HAVOLINE XLC Antifreeze and Water | S | ||
| Engine Oil | Gas | w/Filter | 8.50 QTS. | 8.04 L | SAE 0W-20 meeting specs ST JLR.51.5122 | S | |
| Fuel Tank | Gas | 23.80 GALS. | 90.09 L | S | |||
| Windshield Washer Fluid | 6.35 QTS. | 6 L | Windshield Wash with Frost Protection | Follow the Manufacturer's Instructions for the mixture ratio. Capacities are approximate and provided as a guide only. All oil levels must be checked using the dipstick, level plugs or driver information module, as applicable. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.