2016 Land Rover Range Rover AutobiographyFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 3 Zone Climate Control 2.70 OZS. 0.07 L Polyalkyleneglycol SP-A2 S
Air Cond Compressor Oil 4 Zone Climate Control 4.70 OZS. 0.13 L Polyalkyleneglycol SP-A2 S
Air Cond Refrigerant 3 Zone Climate Control 1.80 LBS. 0.81 KG R-1234yf S
Air Cond Refrigerant Gas 4 Zone Climate Control 2.40 LBS. 1.08 KG R-1234yf S
Automatic Transmission Fluid N/A N/A SHELL ATF L12108 Fill for-life. S
Brake Fluid N/A N/A SHELL DOT4 ESL If unavailable, use a low viscosity DOT4 brake fluid that meets ISO 4925 class 6 requirements. S
Diesel Exhaust Fluid 4.75 GALS. 17.98 L AdBlue, Aus 32 and Arla 32 Meeting: ISO 22241 and ISO 22241-1 S
Differential Gear Oil Front - wet fill 1.08 PTS. 0.51 L CASTROL SAF XO Capacities are approximate and provided as a guide only. All oil levels must be checked using the dipstick, level plugs or driver information module, as applicable. S
Differential Gear Oil Rear (electronic locking) 2.56 PTS. 1.21 L CASTROL BOT 720 Capacities are approximate and provided as a guide only. All oil levels must be checked using the dipstick, level plugs or driver information module, as applicable. S
Differential Gear Oil Rear (non-locking) 1.73 PTS. 0.81 L CASTROL SAF XO Capacities are approximate and provided as a guide only. All oil levels must be checked using the dipstick, level plugs or driver information module, as applicable. S
Engine Coolant 5.0L Eng 18.66 PTS. 8.82 L 50/50 mixture of CASTROL SF Antifreeze and Water Capacities are approximate and provided as a guide only. All oil levels must be checked using the dipstick, level plugs or driver information module, as applicable. S
Engine Oil Gas w/Filter 8.50 QTS. 8.04 L SAE 0W-20 meeting specs ST JLR.51.5122 S
Fuel Tank Gas 22.50 GALS. 85.17 L S
Transfer Case Fluid 3.17 PTS. 1.49 L TL 7300, SHELL TF0753 S
Windshield Washer Fluid 6.65 QTS. 6.29 L Windshield Wash with Frost Protection Follow the Manufacturer's Instructions for the mixture ratio. Capacities are approximate and provided as a guide only. All oil levels must be checked using the dipstick, level plugs or driver information module, as applicable. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.