2016 Land Rover LR4 BaseFACTORY OEM SERVICE PROCEDURE

Module Communications Network: Specifications

WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.

Torque SpecificationsΒ 

Description Nm lb-ft
Central junction box bracket retaining nuts 10 7
Central junction box bracket retaining bolts 25 18
Engine compartment ground cable nuts 25 18
Body panel ground cable nuts 25 18
Vehicles with auxiliary heating - Heater pipes to body panel nut 10 7
Wiring harness to plenum chamber nuts 4 3
Vehicles with auxiliary climate control - A/C lines to body panel nut 10 7
Battery ground cable to body nut 25 18
Battery junction box retaining bolt 6 4
Ground cables to the lower A-pillar nut 10 7
Battery positive cable to the battery junction box (BJB) nut 25 18
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.