2013 Land Rover Range Rover BaseFACTORY OEM SERVICE PROCEDURE

DTC U3000-57: Control Module - Invalid/incomplete software component: Action

  • Using the Jaguar Land Rover Approved Diagnostic Equipment, clear the DTCs and apply and release the electric park brake, if the problem persists re-configure the anti-lock brake system control module with the latest level software
  • Using the Jaguar Land Rover Approved Diagnostic Equipment, clear the DTC and retest. If the fault persists, install a new anti-lock brake system control module
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.