2012 Land Rover LR4 BaseFACTORY OEM SERVICE PROCEDURE

Steering Column: Specifications

GENERAL SPECIFICATION

Item  Specification 
Type Two piece, articulated with flexible coupling to steering rack; fitted with energy absorption system and having a 120 mm (4.7 in) ride down capability with a 4.5 kN (0.45 ton force) maximum decoupling load on the intermediate shaft and a 77 mm (3.0 in) collapse stroke on the lower shaft.
Upper column adjustment:   
Reach 40 mm (1.57 in)
Rake 6°
TORQUE SPECIFICATIONS

Description Nm lb-ft
Steering angle sensor Torx screws 3 2
* Steering column intermediate shaft to lower shaft bolts 30 22
* Steering column intermediate shaft to steering column nut 22 16
Steering column switch assembly Torx bolts 3 2
Steering wheel bolt 63 46

* New bolts/nut must be installed 

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.