2012 Land Rover LR2 BaseFACTORY OEM SERVICE PROCEDURE

Gearshift Interlock Button/Spring Issue (SSM66837)

Publication date: 2015-02-09
Reference number: SSM66837

GEARSHIFT INTERLOCK BUTTON/SPRING ISSUE

GEARSHIFT INTERLOCK BUTTON/SPRING ISSUE

TECHNICAL SERVICE BULLETIN

Reference Number(s): SSM66837, Date of Issue:  February 9, 2015
LAND ROVER: LR2/L359
CATEGORY: Driveline

SERVICE INFORMATION

Symptom  503000 Automatic Transmission Engagement Concerns

Attachments  1Appendix 1 Gear Selector.pdf (1Appendix 1 Gear Selector.pdf)

1Appendix 2 Gear Selector.pdf (1Appendix 2 Gear Selector.pdf)

ISSUE

Content 

The gearshift interlock button inoperative or spring has come adrift (See Appendix 1)

CAUSE

The interlock button mechanism has been modified to prevent this issue from Vin No.

H372254 UK Build

L910950 Pune Build

ACTION

To resolve this issue please replace the gear selector knob ONLY

(See Appendix 2)

NOTE: Replacement of the complete assemby is NOT  necessary.

Please only submit further EPQR's for any vehicles that were manufactured later than the above assured VIN's 

G09808744
G09808745
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.