Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Land Rover LR2 (LF) L6-3.2LFACTORY OEM SERVICE PROCEDURE
System Specifications
Specifications
WARNING: During normal use, batteries emit explosive hydrogen gas sufficient to cause severe explosions and capable of causing serious injury - keep sparks and naked lights away from the engine compartment.
WARNING: DO NOT attempt to start the disabled vehicle if it is suspected that the electrolyte in the battery is frozen.
WARNING: Suitable eye protection must be worn when working in the vicinity of the battery.
WARNING: Take care when working near rotating parts of the engine.
WARNING: Prior to attempting to start the disabled vehicle, ensure that the parking brake is applied or suitably chock the wheels. Ensure that 'P' - PARK - Automatic Transmission or NEUTRAL - Manual Transmission is selected.
CAUTION: Ensure that all electrical loads are switched OFF prior to connecting booster cables and disconnect booster cables prior to using electrical equipment.
CAUTION: Ensure that the battery of the DONOR vehicle is of 12 volt capacity and that all electrical loads on the disabled vehicle are switched OFF prior to connecting booster cables.
CAUTION: Ensure that there is no physical contact between the donor and disabled vehicles other than the booster cables.
NOTE:
Disconnect battery: If the remote control handset is not functioning, it will be necessary to manually unlock the vehicle using the key.
WARNING: During normal use, batteries emit explosive hydrogen gas sufficient to cause severe explosions and capable of causing serious injury - keep sparks and naked lights away from the engine compartment.
WARNING: DO NOT attempt to start the disabled vehicle if it is suspected that the electrolyte in the battery is frozen.
WARNING: Suitable eye protection must be worn when working in the vicinity of the battery.
WARNING: Take care when working near rotating parts of the engine.
WARNING: Prior to attempting to start the disabled vehicle, ensure that the parking brake is applied or suitably chock the wheels. Ensure that 'P' - PARK - Automatic Transmission or NEUTRAL - Manual Transmission is selected.
CAUTION: Ensure that all electrical loads are switched OFF prior to connecting booster cables and disconnect booster cables prior to using electrical equipment.
CAUTION: Ensure that the slave battery/starting aid are of 12 volt capacity and that all electrical loads on the disabled vehicle are switched OFF prior to connecting booster cables.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.