WARNING: This page is about a different car, the 2012 Land Rover Range Rover Sport and 2011 Land Rover Range Rover Sport. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of JAGUAR CARS, INC.

Item Number	Description
1	Face and feet distribution motor
2	LH temperature blend motor
3	Recirculation motor
4	Windshield distribution motor
5	RH temperature blend motor
6	A/C compressor solenoid valve
7	Sunlight sensor
8	Pollution sensor
9	Refrigerant pressure sensor
10	In-vehicle temperature sensor (all except Japan) or in-vehicle temperature and humidity sensor (Japan only)
11	Ambient air temperature sensor
12	Evaporator temperature sensor
13	ATC module
14	ECM
15	ECT sensor
16	Instrument cluster
17	Blower control module
18	BJB (battery junction box)
19	CJB
20	Blower
21	Integrated control Panel

NOTE: A = Hardwired connections; D = High speed controller area network (CAN) bus; N = Medium speed controller area network (CAN) bus

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Control Diagram

Use the Manual With the Right Hardware

When to See a Mechanic