Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Land Rover LR2 (LF) L6-3.2LFACTORY OEM SERVICE PROCEDURE
System Specifications
Specifications
* Prior to checking the engine oil pressure, a road test of 6 miles (10 kilometers) must be carried out. Do not attempt to attain normal engine operating temperature by allowing the engine to idle.
+ There are 50 different thicknesses of graded tappet available ranging from 2.950mm to 3.685 mm (0.116 in to 0.145 in) rising in increments of 0.015 mm (0.0005 in).
* New nuts/bolts must be fitted
A = refer to procedure for correct torque sequence
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.